Das Keyboard Falcon User Manual
Das Keyboard Falcon keyboard uses Bluetooth, radio (with included dongle), and USB to connect to up to 5 devices (computers, tablets, etc).
Welcome
Congratulations on acquiring your Das Keyboard Falcon Wireless Keyboard! Designed with both sophistication and ease of use in mind, this keyboard represents the latest in wireless technology, seamlessly integrating with your computing environment to provide an unparalleled typing experience.
Installation
Das Keyboard Falcon requires no driver and will be automatically recognized by your operating system.
Connecting with USB cable
Plug the keyboard to the computer using the provided cable. Press FN+1 to instruct the keyboard to use the USB channel.
Note: this will also charge the battery.
Connecting with radio dongle
Power the keyboard ON using the power switch to use it wirelessly.
Insert the dongle in the computer and instruct the keyboard to use the radio channel by pressing FN+2.
Bluetooth® pairing
Power the keyboard ON using the power switch to use it wirelessly.
Before using a bluetooth device (e.g. iPhone), the device needs to be paired to the keyboard.
To pair a device
- press and hold the connect button on the back of the keyboard for 2 seconds.
The LED indicator on the front of the keyboard will flash quickly, waiting to connect. - Find Das Keyboard Falcon in the Bluetooth settings on the mobile phone or computer and pair the device with the keyboard.
- After pairing is successful, the LED indicator will be solid for 5 seconds and then turn off. Pairing time can take up to 2 minutes.
- If the pairing is unsuccessful after 2 minutes, stop pairing, turn off the keyboard, and repeat the process.
Das Keyboard Falcon can be paired with up to three Bluetooth devices. Once devices are paired, connect to your target computer or device by using FN+3, FN+4, or FN+5.
Device connection recap
Key pressed Channel used
FN + 1 USB
FN + 2 2.4GHz radio dongle
FN + 3 Bluetooth 1
FN + 4 Bluetooth 2
FN + 5 Bluetooth 3
Charging the Falcon keyboard
To charge your keyboard, connect the USB interface to your computer.
Battery level
When powering the keyboard ON using the power switch, the keyboard back LEDs are used as a gauge to represent the percentage of battery available. The gauge will disappear after a few seconds.
5 LEDs green: 80-100% charge level
4 LEDs green: 60-80% charge level
3 LEDs green: 40-60% charge level
2 LEDs green: 20-40% charge level
1 LED red: <20% charge level
NKRO
Das Keyboard Falcon's full n-key rollover function is always ON.
Additional functions
FN + F1 Display battery power charge LED gauge
FN + ESC Put connected device to sleep (if supported by OS)
FN + INS Print Screen
FN + Home Scroll Lock
FN + PGUP Pause
FN + F1 Battery power status (watch LEDs)
FN + ESC Sleep mode
FN + INS Print Screen
FN + Home Scroll Lock
FN + PGUP Pause
FN + Ctrl+Shift+RRRRRR (Press R 6 times) Factory reset to default settings